Product Instruction:
Our metal crusher/scrap metal crusher machine has the features of stable and compact structure, convenient operation and maintenance.Feeding conveyor is used to improve working efficiency and realize the automation of operation,then the preformer is working,after pressed processing,the metal crusher is used for crushing efficiently.The broken materials can be separated from iron and other impurities by magnetic separation, make best use of the raw materials. The iron can be directly placed on the discharge conveyor, it reduces labor cost. The machine has the most advanced spraying dust removal system, which improves the profit margin 50% at least.Metal crusher is widely applied to steel plant affiliated enterprise, professional scrap steel processing,distributing and recycling enterprise.
In the working principle of the equipment, the metal pulverizer makes use of the basic principle of the hammer strike, under the drive of the high speed and high torque motor, the hammer head on the rotor of the main engine takes turns hitting the material to be broken into the cavity, through the space formed between the liner plate and the hammer head, Tear the debris to be broken into pieces in accordance with the specifications. According to the working condition of the crusher, it can be divided into dry system, wet system and semi-wet system. Dry system mainly means that the broken material must pass through the air rotary sorting system to separate the metal and non-metal, in addition, the whole system is equipped with dust removal device. Wet system is to spray water at the same time of crushing, and to wash with water at the same time of sorting. The semi-wet system only carries out a small amount of water spraying when the crushing needs, to prevent dust, and there is no cleaning. As a high quality equipment for scrap metal crushing treatment, metal crusher can greatly improve the disassembly efficiency of waste metal in terms of investment value, and at the same time enhance the purity of waste iron and steel to provide high quality burden for low cost smelting of scrap metallurgy industry. Metal crusher series products mainly include: easy to pull can grinding, color steel tile crushing, scrap car crushing, paint barrel crushing, iron chip crushing and other series of products can be used for a variety of waste metal recycling crushing processing.
Product Features:
In the working flow, the metal pressing block is fed into the forced feeding and crushing port of the equipment through the feeding device, and the metal pressing block is primary broken by the crushing process of the pressing roller and the coarse crushing shaft, The metal pressing material after primary crushing enters the main engine cavity of the equipment, and under the drive of a high speed and high torque motor, the hammer head on the rotor of the main engine takes turns hitting the metal pressing material entering the main engine cavity through the space between the lining plate and the hammer head, When the crushing block can be fully and effectively broken in the crushing chamber, the crushing block can be torn into a fragment in accordance with the specifications, and then flow down from the screen. The broken material is separated by an air rotary sorting system, and the paint, rust and waste plastic in the metal press block are separated, and the material unloaded at the bottom of the equipment is then transported to the aggregate point through the conveying equipment, In this process, the non-magnetic materials contained in the materials are separated and unloaded from the production line to the non-magnetic materials pile under the action of the magnetic separator.
In addition, the whole system is equipped with dust removal device to minimize the harm of dust pollution in the production process. The equipment mainly has the advantages of high output, low energy consumption, high efficiency, uniform discharge and so on. When the equipment is used, the noise is low, there is no pollution, the operation is simple and the maintenance is convenient.
Pre-sale:
(1) selection of equipment type.
(2) Design and manufacture products according to the special requirements of customers.
(3) training of technical personnel for clients.
(4) The company plans the site for the user free of charge, designs the suitable process and the plan.
On sale:
(1) acceptance of the product.
(2) assisting clients in the preparation of construction plans.
After sale:
(1) assign special after-sales service personnel free of charge to guide customers to install and debug.
(2) installation and debugging of equipment.
(3) on-site training of operators.
(4) after the installation of the complete set of equipment, the full-time technical personnel may assist the customer in on-site production until the user is satisfied.
Contact us if you need more details on Metal Pill Crusher. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Metal Crusher Equipment for Waste Steel、Metal Crusher Machine for Waste Steel. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Crusher Machine > Metal Crusher
