Find Polyester Urethane Powder Coating, Urethane Paint, Powder Coating On Urethane on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Hammer Spray Paint > Matt Hardener For Urethane Powder Coating System
Matt Hardener For Urethane Powder Coating System
  • Matt Hardener For Urethane Powder Coating System

Matt Hardener For Urethane Powder Coating System

Payment Type: L/C,T/T,D/P,Paypal
Terms of Trade: FOB,CFR,CIF,EXW
Min. Order: 1 Bag/Bags
Delivery Time: 7-10 Days

Basic Info

Model No.: HT-801/802

Product Description


Matt Hardener Used For Epoxy, Hybrid, Urethane, Polyester, TGIC-polyester Powder Coating System


Introduction:

Powder coating is a dry finishing process where finely ground particles of pigment and resin are electrostatically charged and sprayed onto a grounded part. The part is then baked in a curing oven, at which time, the powder melts, bonds and cures – leaving an attractive, uniform, high-quality and durable finish. Prior to coating, parts are pre-treated to ensure optimal surface preparation and paint adhesion.
We offer the highest quality powder paint produced by the industries most recognized powder manufacturers.
Epoxy, hybrid, urethane, polyester, TGIC-polyester, various textures and metallics are all available.



COLORS AVAILABLE

· RAL colors coating powder
· Pantone colors
· Color-matching is available

GENERAL TYPES

· Polyester /Hybrid powder coating color
· Epoxy Powder coating color
· Metallic powder coating color
· Hammer tone color powder coating
· Texture color powder coating powder
Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, wood, multi-color.

PHYSICAL PROPERTIES

· Specific gravity : 1.2 ~ 1.8g/cm3 up to colors
· Particle size distribution: 100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)
· Level of liquidity: 24 ~ 27 mm
CURING CONDITIONS
180 °C ~ 200 °C (work piece temperature), 10-15 minutes

AVERAGE COVERAGE
8-12 square meters / kg, thickness 60 microns (100% of the powder coating utilization rate)

PACKING
Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure. Storage products in line with the above conditions, since the date of production, effective storage period is 6 months. Over the storage period may be re-tested and the results were consistent with, can still be used.

HEALTH AND SAFETY

Coating powder is a non-toxic products, but should be avoided in the course of inhalation of dust. Proposed operators wear appropriate dust mask, glasses. If possible, try to avoid long-term skin contact with powder coating

Mechanical property
Testing items Inspecting index
impact strength >50kg/cm
Bending resistance Pass 2-5 millimeters
Adhesion CHECKED TEST Pass100/100, passes 0 levels
Cupdrawing:Erichsen, ISO1520 Pass 3-7 millimeters
Pencil hardness Pass H-2H
Chemical resistance and weather resistance
Salt spray test The cross section of corrosion less than 2MM
Hot and damp resistance test Without air bubbles, loses the light slightly
Acid resistance Without air bubbles, the surface without damage
Alkali resistance Without air bubbles, the surface without damage
Heat resistance The color change is lower than E=1.5
Solvent resistance Without air bubbles, the surface without damage
Uvioresistant

Gloss higher than 80% lower than the
Munsell color change level

Water tolerance of No bubble, not falling, losing light






Guangzhou Quanxu Technology Co Ltd

 

Guangzhou Quanxu Technology Co Ltd has more than 20 years of experience in the chemical industry with a mature management team. The company has independently researched, developed and manufactured several series products including Silica Matting Agent, Polyethylene wax emulsion, inkjet receptive coating and Teflon Heaters etc.


We develop any products is base on accurate market analysis by R&D Center of Matting Agent, Polyethylene wax emulsion and inkjet receptive coating. Their contributions have yielded environmental-friendly products such as the low oil absorption UV matting agent, a compound that was specifically designed to minimize the VOC emission of paints. These Products are the building blocks of eco-friendly alternative engry solutions. Their abilities protect leather and prevent the corrosion of metals make them idea for floor coating, glass paint, and the making of woodenware.


Product quality is always considered as our top priority, we imported a number of advanced testing instruments to enhance quality control and inspection. All of Quanxu products are approved by international recognized safe standards such as SGS and ROHS.


Through sustained growth and expansion, Quanxu Technology strives to become a world-leading supplier of chemical materials. With quality and integrity, we will create an enterprise that can withstand the test of time!!

Company Info
  • Company Name: Guangzhou Quanxu Technology Co Ltd
  • Representative: Mr Pan
  • Product/Service: Paint Matting Agent , Silica Matting Agent , Inkjet Receptive Coating , Alumina Oxide , Teflon Heater , Fumed SIlica
  • Capital (Million US $): 50000000
  • Year Established: 1999
  • Total Annual Sales Volume (Million US $): US$50 Million - US$100 Million
  • Export Percentage: 31% - 40%
  • Total Annual Purchase Volume (Million US $): US$5 Million - US$10 Million
  • No. of Production Lines: 10
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 11 -20 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 1,000-3,000 square meters
  • Factory Location: High-Tech Development Zone, Guangdong Province, P.R.China
  • Contact Person: Mr. Don
  • Tel: 86-020-31062685
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters